Poly(dimethylsiloxane) , averageM.W.115,000 , 9016-00-6
Synonym(s):
Polydimethylsiloxane;Dimethylpolysiloxane;Octamethyltrisiloxane;α-(Trimethylsilyl)-ω-methylpoly[oxy(dimethylsilylene)] mixture with silicon dioxide;Antifoam A
CAS NO.：9016-00-6
Empirical Formula: C5H6Si
Molecular Weight: 94.1866
MDL number: MFCD00148360
EINECS: 618-493-1
| Pack Size | Price | Stock | Quantity |
| 50G | RMB73.60 | In Stock |
|
| 250G | RMB284.80 | In Stock |
|
| 1kg | RMB791.20 | In Stock |
|
| 5kg | RMB3336.80 | In Stock |
|
| others | Enquire |
PRODUCT Properties
| Melting point: | -35°C |
| Boiling point: | 155-220°C |
| Density | 0.971 |
| vapor pressure | 5 mm Hg ( 20 °C) |
| refractive index | 1.4035 |
| Flash point: | 63°C |
| storage temp. | Refrigerator |
| solubility | Chloroform (Slightly), Methanol (Slightly) |
| form | Viscous Liquid |
| Specific Gravity | 0.918 |
| color | Colorless |
| Water Solubility | INSOLUBLE |
| Stability: | Stable. Flammable or combustible. Flammability depends upon extent of polymerization. Incompatible with strong oxidizing agents. |
Description and Uses
Silicones are polymeric materials having silicon and oxygen on their composition. They are largely inert compounds usually heat-resistant, nonstick, and rubberlike. Polydimethylsiloxane (PDMS, molecular formula (C2H6OSi)n, density 965 kg/m3, boiling point: < 200℃, shear modulus between 100 kPa and 3 MPa, loss tangent less than 0.001) is a viscoelastic polymer (elastomer). PDMS is widely used in microfluidic technology thanks to some of its unique properties: it is low cost, nontoxic, chemically resistant, and stable against humidity and temperature variations. PDMS also presents low interfacial energy, which allows it to avoid chemical interactions with other polymers and solutions in the microfluidic channels. After polymerization and cross-linking, solid PDMS presents hydrophobic surface. A treatment using plasma oxidation is frequently used to alter the surface chemistry by adding silanol (SiOH) groups to the surface terminations and make the surface hydrophilic (wettable). PDMS is usually used as sealant, structural microchannel material or elastomer stamping matrix in soft lithography techniques like microcontact printing and micromolding.
Safety
| Symbol(GHS) |  GHS02 |
| Signal word | Danger |
| Hazard statements | H226-H227 |
| Precautionary statements | P210e-P370+P378a-P403+P235-P210-P240-P241-P280a-P303+P361+P353-P501a |
| Risk Statements | 36/37/38 |
| Safety Statements | 24/25 |
| RIDADR | 1993 |
| WGK Germany | 2 |
| RTECS | TQ2690000 |
| TSCA | Yes |
| HazardClass | 3 |
| HS Code | 39100000 |
