Vinyl acetate , StandardforGC,≥99.5%(GC) , 108-05-4
Synonym(s):
Acetic acid vinyl ester;Acetoxyethylene;VAc;Vinyl acetate
CAS NO.：108-05-4
Empirical Formula: C4H6O2
Molecular Weight: 86.09
MDL number: MFCD00008713
EINECS: 203-545-4
PRODUCT Properties
| Melting point: | -93 °C (lit.) |
| Boiling point: | 72-73 °C (lit.) |
| Density | 0.934 g/mL at 25 °C (lit.) |
| vapor density | 3 (vs air) |
| vapor pressure | 88 mm Hg ( 20 °C) |
| refractive index | n |
| Flash point: | 20 °F |
| storage temp. | 2-8°C |
| solubility | 20g/l |
| form | Liquid |
| color | Clear colorless to almost colorless |
| PH | 7 (20g/l, H2O, 20℃) |
| explosive limit | 2.6-13.4%(V) |
| Water Solubility | 23 g/L (20 ºC) |
| Sensitive | Light Sensitive |
| Merck | 14,9992 |
| BRN | 1209327 |
| Henry's Law Constant | 4.81 (calculated, Howard, 1989) |
| Exposure limits | NIOSH REL: 15-min ceiling 4 ppm (15 mg/m3); ACGIH TLV: TWA 10 ppm,
STEL 15 ppm (adopted). |
| Dielectric constant | 4.5（23℃） |
| Stability: | Stable. Highly flammable. Incompatible with acids, bases, oxidizing agents, peroxides, chlorosulfonic acid, ethylene imine, hydrochloric acid, oleum, nitric acid, sulfuric acid, 2-aminoethanol, light. Susceptible to polymerization; commercial product may be stabilized by the addition of hydroquinone. |
| LogP | 0.73 at 20℃ |
Description and Uses
Vinyl acetate monomer (VAM) is a colourless liquid, immiscible or slightly soluble in water. VAM is a flammable liquid. VAM has a sweet, fruity smell (in small quantities), with sharp, irritating odour at higher levels. VAM is an essential chemical building block used in a wide variety of industrial and consumer products. VAM is a key ingredient in emulsion polymers, resins, and intermediates used in paints, adhesives, coatings, textiles, wire and cable polyethylene compounds, laminated safety glass, packaging, automotive plastic fuel tanks, and acrylic fibres. Vinyl acetate is used to produce polyvinyl acetate emulsions and resins. Very small residual levels of vinyl acetate have been found present in products manufactured using VAM, such as moulded plastic items, adhesives, paints, food packaging containers, and hairspray.
Vinyl acetate is primarily used to produce polyvinyl acetate emulsions and polyvinyl alcohol. The principal use of these emulsions has been in adhesives, paints, textiles, and paper products.
Safety
| Symbol(GHS) |    GHS02,GHS07,GHS08 |
| Signal word | Danger |
| Hazard statements | H225-H332-H335-H351-H412 |
| Precautionary statements | P202-P210-P233-P273-P304+P340+P312-P308+P313 |
| Hazard Codes | F,T,Xn |
| Risk Statements | 11-39/23/24/25-23/24/25-36-20/21/22-40-37-20 |
| Safety Statements | 16-23-29-33-45-36/37-7-9 |
| RIDADR | UN 1301 3/PG 2 |
| OEL | Ceiling: 4 ppm (15 mg/m3) [15-minute] |
| WGK Germany | 2 |
| RTECS | AK0875000 |
| Autoignition Temperature | 801 °F |
| TSCA | Yes |
| HazardClass | 3 |
| PackingGroup | II |
| HS Code | 29153200 |
| HS Code | 29333999 |
| Toxicity | LD50 orally in rats: 2.92 g/kg (Smyth, Carpenter) |
